To setup port forwarding on the Sagem Fast1500WG router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sagem Fast1500WG router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sagem Fast1500WG router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your Sagem Fast1500WG password. Enter the password now.
Click the Ok button to log in to your Sagem Fast1500WG router.
Please visit our Default Sagem Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sagem Fast1500WG router password, use our How to Reset a Router Password guide to set your Sagem Fast1500WG router back to its factory settings.
Now that you are logged in to your Sagem Fast1500WG router you should see the following:
Click the NAT link near the left of the page.
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Speco Technologies TL DVRs requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.
|No.||Lan IP Address||Protocol Type||Lan
When you're finished, click Save and Reboot near the top of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Speco Technologies TL DVRs on the Sagem Fast1500WG you should test to see if your ports are forwarded correctly.