To setup port forwarding on the Sagem Livebox-Fast-3202 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sagem Livebox-Fast-3202 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sagem Livebox-Fast-3202 router. By default the IP address should be set to 192.168.0.1.
Click the Ok button to log in to your Sagem Livebox-Fast-3202 router.
Please visit our Default Sagem Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sagem Livebox-Fast-3202 router username and password, use our How to Reset a Router Password guide to set your Sagem Livebox-Fast-3202 router back to its factory settings.
Now that you are logged in to your Sagem Livebox-Fast-3202 router you should see the following:
Click the Serveurs LAN button near the top of the page.
Click the Ajouter button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Zmodo H9516 requires you to forward the 80,2200 ports. Go ahead and enter the settings shown above into the Serveurs LAN menu and then click Appliquer.
|Local IP address:|
You should see another page of settings that need to be entered into one of the blank lines on your routers Serveurs LAN page. Go ahead and enter those settings and then click Appliquer.
|Local IP address:|
Click the Sauver / Effacer / Redemarrer button near the top of the page.
When you're finished, click Sauver near the center of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Zmodo H9516 on the Sagem Livebox-Fast-3202 you should test to see if your ports are forwarded correctly.