To setup port forwarding on the Sagem LiveboxTP-Fast3202 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sagem LiveboxTP-Fast3202 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sagem LiveboxTP-Fast3202 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Sagem LiveboxTP-Fast3202 router.
Please visit our Default Sagem Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sagem LiveboxTP-Fast3202 router username and password, use our How to Reset a Router Password guide to set your Sagem LiveboxTP-Fast3202 router back to its factory settings.
BitComet chooses a random port to listen on when you install it. Before we can forward ports for BitComet, we need to find out what port BitComet is using. Go ahead and open BitComet.
In the menu at the top of your screen, click Options. Clicking Options will cause a menu to drop down. In this new menu click Preferences.
In the menu on the left the top option Connection should be selected. On the right hand side of this window you should see a Listen Port option. That is the port that you need to forward. You can change it if you like. Please enter the listen port below.
There is one more thing we need to do. We need to shut off the UPNP of BitComet.
In the menu on the left hand side under Advanced, click Connection. There should be an Enable UPnP Port Mapping(XP only) checkbox on the right hand side. Make sure it is unchecked.
Now that you are logged in to your Sagem LiveboxTP-Fast3202 router you should see the following:
Click the LAN servers button near the top of the page.
Click the Add button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BitComet requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the LAN server configuration menu and then click Apply.
|Local IP address:|
Click the Save / Erase / Reboot button near the top of the page.
When you're finished, click Save near the top of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for BitComet on the Sagem LiveboxTP-Fast3202 you should test to see if your ports are forwarded correctly.