If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Sagemcom 3764_Orange_PL router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sagemcom 3764_Orange_PL router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Sagemcom 3764_Orange_PL router.
Please visit our Default Sagemcom Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sagemcom 3764_Orange_PL router username and password, use our How to Reset a Router Password guide to set your Sagemcom 3764_Orange_PL router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Sagemcom 3764_Orange_PL router to save you time and hassle.
Before we can forward ports for Utorrent, we need to figure out what ports Utorrent is using. Here is a brief walkthrough on how to do that. Go ahead and open up Utorrent.
Click Options in the menu at the top of your screen. In the list that drops down click Preferences.
Click Connections on the left hand side of the Utorrent program. You should now see the menu shown in the screenshot above. Make sure the Enable UPnP box is unchecked. The number in the Port Used for Incoming Connections box contains the port you need to forward. You can change the port number, if you want to. Please enter the port you chose into the box below.
Now that you are logged in to your Sagemcom 3764_Orange_PL router you should see the following:
Click the NAT/PAT link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Utorrent requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the NAT/PAT menu and then click Confirm.
You should see another page of settings that need to be entered into one of the blank lines on your routers NAT/PAT page. Go ahead and enter those settings and then click Confirm.
And that is it! You are done!
Now that you have forwarded ports for Utorrent on the Sagemcom 3764_Orange_PL you should test to see if your ports are forwarded correctly.