To setup port forwarding on the Siemens 4200 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Siemens 4200 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Siemens 4200 router. By default the IP address should be set to 10.0.0.138.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Siemens 4200 router.
Please visit our Default Siemens Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Siemens 4200 router username and password, use our How to Reset a Router Password guide to set your Siemens 4200 router back to its factory settings.
Now that you are logged in to your Siemens 4200 router you should see the following:
Click the Setup link near the left of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lorex LH310 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Port Forwarding Configuration menu and then click Apply.
|Add / Edit Entry|
|Select service by name:|
|- OR -|
|Select protocol:||and TCP/UDP ports:||-|
|Redirect select protocol/service to this router.|
|Redirect select protocol/service to IP Address:|
And that is it! You are done!
Now that you have forwarded ports for Lorex LH310 on the Siemens 4200 you should test to see if your ports are forwarded correctly.