To setup port forwarding on the Siemens Gigaset-SE567 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Siemens Gigaset-SE567 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Siemens Gigaset-SE567 router. By default the IP address should be set to 192.168.1.254.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Before we can forward ports for Utorrent, we need to figure out what ports Utorrent is using. Here is a brief walkthrough on how to do that. Go ahead and open up Utorrent.
Click Options in the menu at the top of your screen. In the list that drops down click Preferences.
Click Connections on the left hand side of the Utorrent program. You should now see the menu shown in the screenshot above. Make sure the Enable UPnP box is unchecked. The number in the Port Used for Incoming Connections box contains the port you need to forward. You can change the port number, if you want to. Please enter the port you chose into the box below.
Now that you are logged in to your Siemens Gigaset-SE567 router you should see the following:
Click the Advanced Settings button near the top of the page.
Click the Internet link near the left of the page.
You should now see a new menu. In this new menu, click Address Translation.
You should now see a new menu. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Utorrent requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Apply.
|Select protocol: and TCP/UDP port(s): -|
|Redirect select protocol/service to IP Address:|
And that is it! You are done!
Now that you have forwarded ports for Utorrent on the Siemens Gigaset-SE567 you should test to see if your ports are forwarded correctly.