Port Forwarding DiabloII on the Siemens GigasetSE551
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.
Or you can take alook at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.2.1.
Click the Advanced Settings button near the top of the page.
Click the Internet link near the left of the page.
You should now see a new menu. In this new menu, click Address Translation (NAT).
You should now see a new menu. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. DiabloII requires you to forward the 4000,6112-6119 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.
| Protocol | Public port | Local port | Local IP Address | Comment | Enabled | |
| 192... | ||||||
| Predefined applications: | 192... | |||||
When you're finished, click Ok near the bottom of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
