To setup port forwarding on the Siemens GigasetSE551 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Siemens GigasetSE551 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Siemens GigasetSE551 router. By default the IP address should be set to 192.168.2.1.
Now that you are logged in to your Siemens GigasetSE551 router you should see the following:
Click the Ok button to log in to your Siemens GigasetSE551 router.
Please visit our Default Siemens Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Siemens GigasetSE551 router username and password, use our How to Reset a Router Password guide to set your Siemens GigasetSE551 router back to its factory settings.
Click the Advanced Settings button near the top of the page.
Click the Internet link near the left of the page.
You should now see a new menu. In this new menu, click Address Translation (NAT).
You should now see a new menu. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Kameo Elements of Power requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.
|Protocol||Public port||Local port||Local IP Address||Comment||Enabled|
When you're finished, click Ok near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Kameo Elements of Power on the Siemens GigasetSE551 you should test to see if your ports are forwarded correctly.