Port Forwarding the Siemens GigasetSX552 Router for QSee QSDR04RTC


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Siemens Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Siemens > GigasetSX552 > QSee QSDR04RTC

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Siemens GigasetSX552 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.2. <-- Don't Skip This Step!

Login to the Siemens GigasetSX552 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Siemens GigasetSX552 Router IP Address

It's ok if you don't know your Siemens GigasetSX552 router's internal IP address. You can find it by doing one of the following:

Login To The Siemens GigasetSX552 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Siemens GigasetSX552 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Siemens GigasetSX552 router. By default the IP address should be set to 192.168.2.1.

How to Port Forward QSee QSDR04RTC on the Siemens GigasetSX552


Having trouble forwarding ports on the Siemens GigasetSX552?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Siemens GigasetSX552 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Siemens GigasetSX552 Router Port Forwarding Screenshots

Now that you are logged in to your Siemens GigasetSX552 router you should see the following:

Siemens GigasetSX552 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Siemens GigasetSX552 Router Username is: blank

The Default Siemens GigasetSX552 Router Password is: blank


Click the Ok button to log in to your Siemens GigasetSX552 router.


Default Usernames and Passwords for other Siemens Routers

Please visit our Default Siemens Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Siemens GigasetSX552 router username and password, use our How to Reset a Router Password guide to set your Siemens GigasetSX552 router back to its factory settings.


Siemens GigasetSX552 Screenshot 2

Click the Advanced Settings button near the top of the page.

Siemens GigasetSX552 Screenshot 3

Click the Internet link near the left of the page.

Siemens GigasetSX552 Screenshot 4

Click the Address Translation (NAT) link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Siemens GigasetSX552 Screenshot 5

Forward Ports 80 on the Siemens GigasetSX552

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR04RTC requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

Protocol Public port Local port Local IP Address Comment Enabled  
192...
Predefined applications: 192...


Forward Ports 9000 on the Siemens GigasetSX552

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR04RTC requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

Protocol Public port Local port Local IP Address Comment Enabled  
192...
Predefined applications: 192...

When you're finished, click Ok near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSDR04RTC on the Siemens GigasetSX552 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Siemens GigasetSX552 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Siemens Router Screenshots. We have the Internets largest collection of Router Screenshots.