Port Forwarding the Siemens c-010-i Router for Point-to-Point Tunneling Protocol

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Siemens Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Siemens > c-010-i > Point-to-Point Tunneling Protocol

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Siemens c-010-i router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Siemens c-010-i Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Siemens c-010-i Router IP Address

It's ok if you don't know your Siemens c-010-i router's internal IP address. You can find it by doing one of the following:

Login To The Siemens c-010-i Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Siemens c-010-i Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Siemens c-010-i router. By default the IP address should be set to

Siemens c-010-i Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward Point-to-Point Tunneling Protocol on the Siemens c-010-i

Having trouble forwarding ports on the Siemens c-010-i?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Siemens c-010-i Router Port Forwarding Screenshots

Now that you are logged in to your Siemens c-010-i router you should see the following:

Siemens c-010-i Screenshot 2

Click the Virtual Server link near the left of the page.

Siemens c-010-i Screenshot 3

Forward Ports 1723 on the Siemens c-010-i

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Point-to-Point Tunneling Protocol requires you to forward the 1723 ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Add This Setting.

ID  Public Port - Start  Public Port - End  Private Port  Port Type  Host IP Address   

When you're finished, click Save Settings / Reboot near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Point-to-Point Tunneling Protocol on the Siemens c-010-i you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Siemens c-010-i Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Siemens Router Screenshots. We have the Internets largest collection of Router Screenshots.