To setup port forwarding on the Siemens e-110 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Siemens e-110 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Siemens e-110 router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Siemens e-110 router.
Please visit our Default Siemens Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Siemens e-110 router username and password, use our How to Reset a Router Password guide to set your Siemens e-110 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Siemens e-110 router to save you time and hassle.
Now that you are logged in to your Siemens e-110 router you should see the following:
Click the Services link near the left of the page.
You should now see a new menu. In this new menu, click NAT.
Select NAT Rule Entry from the NAT Options drop down box.
Click the Add button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Giants Citizen Kabuto requires you to forward the 19712 ports. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Submit.
|Nat Rule Information|
|Local Address From:|
|Local Address To:|
|Global Address From:|
|Global Address To:|
|Destination Port From:|
|Destination Port To:|
Click the admin link near the left of the page.
You should now see a new menu. In this new menu, click Commit and Reboot.
And that is it! You are done!
Now that you have forwarded ports for Giants Citizen Kabuto on the Siemens e-110 you should test to see if your ports are forwarded correctly.