To setup port forwarding on the Sierra Wireless Overdrive_Pro router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sierra Wireless Overdrive_Pro router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sierra Wireless Overdrive_Pro router. By default the IP address should be set to 192.168.0.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Reverend which is the client side of MatchWatch needs to have 5600 through 5699 using the TCP protocol forwarded. You also
need to forward port 5500 through 5599 TCP for Reverend to talk with MatchWatch.
If you have a second computer that will be playing Reverend, you should forward port 12205 UDP to that computer and enter 12205 in the front of Reverend.
For more information on MOHAA MatchWatch please visit mohworld.org.
Now that you are logged in to your Sierra Wireless Overdrive_Pro router you should see the following:
Click the Advanced Settings button near the top of the page.
Click the Router button near the top of the page.
You should now see a new menu. In this new menu, click Port Forward.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. MOHAA Reverend requires you to forward the 5500-5699 ports. Go ahead and enter the settings shown above into the Port Forward menu and then click Add.
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for MOHAA Reverend on the Sierra Wireless Overdrive_Pro you should test to see if your ports are forwarded correctly.