Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sitecom DC-202 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sitecom DC-202 router. By default the IP address should be set to 192.168.0.1.
Click the Ok button to log in to your Sitecom DC-202 router.
Please visit our Default Sitecom Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sitecom DC-202 router username and password, use our How to Reset a Router Password guide to set your Sitecom DC-202 router back to its factory settings.
Now that you are logged in to your Sitecom DC-202 router you should see the following:
Click the Advanced button near the right of the page.
Click the Virtual Servers link near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Cu-SeeMe Cornell requires you to forward the 7648 ports. Go ahead and enter the settings shown above into the Virtual Servers menu and then click Add as new Server.
|PC(Server):||My PC is not Listed|
|Internal (LAN) Ports:||~|
|External (WAN) Ports:||~|
And that is it! You are done!
Now that you have forwarded ports for Cu-SeeMe Cornell on the Sitecom DC-202 you should test to see if your ports are forwarded correctly.