Port Forwarding the Sitecom DC-202v3 Router for Transmission

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Sitecom Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Sitecom > DC-202v3 > Transmission

Login to the Sitecom DC-202v3 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Sitecom DC-202v3 Router IP Address

It's ok if you don't know your Sitecom DC-202v3 router's internal IP address. You can find it by doing one of the following:

Login To The Sitecom DC-202v3 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Sitecom DC-202v3 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sitecom DC-202v3 router. By default the IP address should be set to

Sitecom DC-202v3 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Sitecom DC-202v3 Router Username is: blank

The Default Sitecom DC-202v3 Router Password is: blank

Click the Ok button to log in to your Sitecom DC-202v3 router.

Default Usernames and Passwords for other Sitecom Routers

Please visit our Default Sitecom Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Sitecom DC-202v3 router username and password, use our How to Reset a Router Password guide to set your Sitecom DC-202v3 router back to its factory settings.

How to Port Forward Transmission on the Sitecom DC-202v3

Having trouble forwarding ports on the Sitecom DC-202v3?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Sitecom DC-202v3 router to save you time and hassle.

Sitecom DC-202v3 Router Port Forwarding Screenshots

Now that you are logged in to your Sitecom DC-202v3 router you should see the following:

Sitecom DC-202v3 Screenshot 2

Click the Advanced link near the left of the page.

Sitecom DC-202v3 Screenshot 3

Click the Virtual Servers button near the top of the page.

Sitecom DC-202v3 Screenshot 4

Forward Ports 51413 on the Sitecom DC-202v3

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Transmission requires you to forward the 51413 ports. Go ahead and enter the settings shown above into the Virtual Servers menu and then click Add as new Server.

PC (Server): My PC is not listed
Internal (LAN) Ports: ~  
External (WAN) Ports: ~  

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Transmission on the Sitecom DC-202v3 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sitecom DC-202v3 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Sitecom Router Screenshots. We have the Internets largest collection of Router Screenshots.