Port Forwarding the Sitecom DC-202v5 Router for QSee QT428-803

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Sitecom Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Sitecom > DC-202v5 > QSee QT428-803

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Sitecom DC-202v5 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.123. <-- Don't Skip This Step!

Login to the Sitecom DC-202v5 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Sitecom DC-202v5 Router IP Address

It's ok if you don't know your Sitecom DC-202v5 router's internal IP address. You can find it by doing one of the following:

Login To The Sitecom DC-202v5 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Sitecom DC-202v5 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sitecom DC-202v5 router. By default the IP address should be set to

Sitecom DC-202v5 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Sitecom DC-202v5 Router Username is: admin

The Default Sitecom DC-202v5 Router Password is: admin

Click the Ok button to log in to your Sitecom DC-202v5 router.

Default Usernames and Passwords for other Sitecom Routers

Please visit our Default Sitecom Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Sitecom DC-202v5 router username and password, use our How to Reset a Router Password guide to set your Sitecom DC-202v5 router back to its factory settings.

How to Port Forward QSee QT428-803 on the Sitecom DC-202v5

Having trouble forwarding ports on the Sitecom DC-202v5?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

  • Go to the Network Menu.
  • Put a check into the Obtain an IP Address Automatically box.
  • Click the Test button.
  • Look near the lower left corner. If it says Ok, then click on Apply, then Exit.

  • Go to Menu - Information and Network
  • Write down the IP Address, Subnet Mask and Gateway.

  • Go back to the Network Menu.
  • Uncheck the Obtain an IP Address Automatically box.
  • Now enter the IP Address, Gateway and Subnet Mask you wrote down earlier.
  • When you're done click Apply, then Exit.

Sitecom DC-202v5 Router Port Forwarding Screenshots

Now that you are logged in to your Sitecom DC-202v5 router you should see the following:

Sitecom DC-202v5 Screenshot 2

Click the Advanced Settings link near the top of the page.

Sitecom DC-202v5 Screenshot 3

Forward Ports 80 on the Sitecom DC-202v5

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QT428-803 requires you to forward the following ports: 80,6036. Go ahead and enter the settings shown above into the Virt. Serv. menu.

ID  Public Port - Start  Public Port - End  Private Port  Port Type  Host IP Address   

Forward Ports 6036 on the Sitecom DC-202v5

You should see another page of settings that need to be entered into one of the blank lines on your routers Virt. Serv. page. Go ahead and enter those settings now.

ID  Public Port - Start  Public Port - End  Private Port  Port Type  Host IP Address   

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QT428-803 on the Sitecom DC-202v5 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sitecom DC-202v5 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Sitecom Router Screenshots. We have the Internets largest collection of Router Screenshots.