To setup port forwarding on the Sitecom DC-202v6 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sitecom DC-202v6 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sitecom DC-202v6 router. By default the IP address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Sitecom DC-202v6 router.
Please visit our Default Sitecom Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sitecom DC-202v6 router username and password, use our How to Reset a Router Password guide to set your Sitecom DC-202v6 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Sitecom DC-202v6 router to save you time and hassle.
Now that you are logged in to your Sitecom DC-202v6 router you should see the following:
Click the Firewall link near the top of the page.
Click the Virt. Serv. button near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Terminator Salvation The Future Begins -title pending- requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Custom Services menu and then click Apply.
|Private IP||Private Port||Type||Public Port||Enable|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Terminator Salvation The Future Begins -title pending- on the Sitecom DC-202v6 you should test to see if your ports are forwarded correctly.