To setup port forwarding on the Sitecom DC-216 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sitecom DC-216 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sitecom DC-216 router. By default the IP address should be set to 192.168.1.254.
Click the Ok button to log in to your Sitecom DC-216 router.
Please visit our Default Sitecom Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sitecom DC-216 router username and password, use our How to Reset a Router Password guide to set your Sitecom DC-216 router back to its factory settings.
Now that you are logged in to your Sitecom DC-216 router you should see the following:
Click the Configuration link near the left of the page.
Click the Virtual Servers button near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Yahoo Super Webcam requires you to forward the 5100 ports. Go ahead and enter the settings shown above into the Virtual Servers menu and then click Add This Setting.
|ID||Public Port||Private Port||Port Type||Host IP Address|
Click the Save button near the top of the page.
When you're finished, click Submit near the center of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Yahoo Super Webcam on the Sitecom DC-216 you should test to see if your ports are forwarded correctly.