To setup port forwarding on the Sitecom WL-114 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sitecom WL-114 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sitecom WL-114 router. By default the IP address should be set to 192.168.123.254.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Sitecom WL-114 router.
Please visit our Default Sitecom Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sitecom WL-114 router username and password, use our How to Reset a Router Password guide to set your Sitecom WL-114 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Sitecom WL-114 router to save you time and hassle.
Now that you are logged in to your Sitecom WL-114 router you should see the following:
Click the Advanced Settings link near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Saints Row 3 requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virt. Serv. menu.
|ID||Service Ports||Server IP||Enable||Use Rule #|
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Saints Row 3 on the Sitecom WL-114 you should test to see if your ports are forwarded correctly.