Port Forwarding the Sitecom WL-127v2 Router for Cu-SeeMe Cornell


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Sitecom Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Sitecom > WL-127v2 > Cu-SeeMe Cornell

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Sitecom WL-127v2 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Sitecom WL-127v2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Sitecom WL-127v2 Router IP Address

It's ok if you don't know your Sitecom WL-127v2 router's internal IP address. You can find it by doing one of the following:

Login To The Sitecom WL-127v2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Sitecom WL-127v2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sitecom WL-127v2 router. By default the IP address should be set to 192.168.0.1.

Sitecom WL-127v2 Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward Cu-SeeMe Cornell on the Sitecom WL-127v2


Having trouble forwarding ports on the Sitecom WL-127v2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Sitecom WL-127v2 router to save you time and hassle.

Sitecom WL-127v2 Router Port Forwarding Screenshots

Now that you are logged in to your Sitecom WL-127v2 router you should see the following:

Sitecom WL-127v2 Screenshot 2

Click the Advanced Setup button near the top of the page.

You should now see a new menu. In this new menu, click NAT.

Sitecom WL-127v2 Screenshot 3

Click the Virtual Server link near the bottom of the page.

Sitecom WL-127v2 Screenshot 4

Forward Ports 7648 on the Sitecom WL-127v2

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Cu-SeeMe Cornell requires you to forward the 7648 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

Rule Index :
Application :
Start Port Number :
End Port Number :
Local IP Address :

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Cu-SeeMe Cornell on the Sitecom WL-127v2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sitecom WL-127v2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Sitecom Router Screenshots. We have the Internets largest collection of Router Screenshots.