Port Forwarding the Sitecom WL-607 Router for Zmodo M6909

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Sitecom Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Sitecom > WL-607 > Zmodo M6909

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Sitecom WL-607 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Sitecom WL-607 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Sitecom WL-607 Router IP Address

It's ok if you don't know your Sitecom WL-607 router's internal IP address. You can find it by doing one of the following:

Login To The Sitecom WL-607 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Sitecom WL-607 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sitecom WL-607 router. By default the IP address should be set to

Sitecom WL-607 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Sitecom WL-607 Router Username is: admin

The Default Sitecom WL-607 Router Password is: admin

Click the Ok button to log in to your Sitecom WL-607 router.

Default Usernames and Passwords for other Sitecom Routers

Please visit our Default Sitecom Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Sitecom WL-607 router username and password, use our How to Reset a Router Password guide to set your Sitecom WL-607 router back to its factory settings.

How to Port Forward Zmodo M6909 on the Sitecom WL-607

Having trouble forwarding ports on the Sitecom WL-607?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Sitecom WL-607 router to save you time and hassle.

Sitecom WL-607 Router Port Forwarding Screenshots

Now that you are logged in to your Sitecom WL-607 router you should see the following:

Sitecom WL-607 Screenshot 2

Click the Firewall link near the top of the page.

Sitecom WL-607 Screenshot 3

Click the Port fw. button near the top of the page.

Sitecom WL-607 Screenshot 4

Forward Ports 80 on the Sitecom WL-607

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Zmodo M6909 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Port fw. menu and then click Apply.

Enable Port Forwarding
IP Address: Protocol: Port Range: - Comment:

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Zmodo M6909 on the Sitecom WL-607 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sitecom WL-607 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Sitecom Router Screenshots. We have the Internets largest collection of Router Screenshots.