To setup port forwarding on the Soho 1A400+ router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Soho 1A400+ router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Soho 1A400+ router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Soho 1A400+ router.
Please visit our Default Soho Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Soho 1A400+ router username and password, use our How to Reset a Router Password guide to set your Soho 1A400+ router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Soho 1A400+ router to save you time and hassle.
Now that you are logged in to your Soho 1A400+ router you should see the following:
Click the Advanced Setup link near the top of the page.
Click the Virtual Server button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Tony Hawks Proving Ground requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click ADD.
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click ADD.
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Tony Hawks Proving Ground on the Soho 1A400+ you should test to see if your ports are forwarded correctly.