If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Soho TEI402Mv2 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Soho TEI402Mv2 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Soho TEI402Mv2 router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!
Please visit our Default Router Passwords page if the username and password shown above do not work for you.If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Soho TEI402Mv2 router to save you time and hassle.
Now that you are logged in to your Soho TEI402Mv2 router you should see the following:
Click the Virtual Server link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. PS3 Tiberium requires you to forward the following ports: 5223,3478,3479,3658. Go ahead and enter the settings shown above into the Virtual Server menu.
| ID | Service Port | Private IP | Enable | Del |
| 1. | 192.168.1. |
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.
| ID | Service Port | Private IP | Enable | Del |
| 2. | 192.168.1. |
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.
| ID | Service Port | Private IP | Enable | Del |
| 3. | 192.168.1. |
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.
| ID | Service Port | Private IP | Enable | Del |
| 4. | 192.168.1. |
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for PS3 Tiberium on the Soho TEI402Mv2 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Didn't find the screenshot you were looking for? Check our our Soho Router Screenshots. We have the Internets largest collection of Router Screenshots.