Port Forwarding the Solwise SAR-600EW Router for Network Thermostat UP32-WIFI

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Solwise > SAR-600EW > Network Thermostat UP32-WIFI

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Solwise SAR-600EW router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Solwise SAR-600EW Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Solwise SAR-600EW Router IP Address

It's ok if you don't know your Solwise SAR-600EW router's internal IP address. You can find it by doing one of the following:

Login To The Solwise SAR-600EW Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Solwise SAR-600EW Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Solwise SAR-600EW router. By default the IP address should be set to

Solwise SAR-600EW Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Solwise SAR-600EW Router Username is: admin

The Default Solwise SAR-600EW Router Password is: admin

Click the Ok button to log in to your Solwise SAR-600EW router.

Default Usernames and Passwords for other Solwise Routers

Please visit our Default Solwise Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Solwise SAR-600EW router username and password, use our How to Reset a Router Password guide to set your Solwise SAR-600EW router back to its factory settings.

How to Port Forward Network Thermostat UP32-WIFI on the Solwise SAR-600EW

Having trouble forwarding ports on the Solwise SAR-600EW?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Before we can forward ports, we need to do a little configuration. Here is a brief walkthrough on how to do that. Go ahead and open up your thermostat's Configuration page.

On this page you need to change the HTTP Port to 81, and ASCII Port to 10001. For every additional thermostat you'll want to increase each number by one. So thermostat #1 would be ports 81 and 10001, thermostat #2 would be ports 82 and 10002, thermostat #3 would be ports 83 and 10003, ect.

Once you've finished configuring things, go ahead and click the Save & Reboot button to save things. After you have finished saving and rebooting, you will need to log in to your thermostat again.

Solwise SAR-600EW Router Port Forwarding Screenshots

Now that you are logged in to your Solwise SAR-600EW router you should see the following:

Solwise SAR-600EW Screenshot 2

Click the Advanced button near the top of the page.

The menu on the left should change. In this new menu, click Port Forwarding.

Solwise SAR-600EW Screenshot 3

Put a dot into the User radio button.

Click the New button.

Solwise SAR-600EW Screenshot 4

Forward Ports 81 on the Solwise SAR-600EW

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Network Thermostat UP32-WIFI requires you to forward the 81,10001 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name :    
Protocol :    
Port Start : Port End :
Port Map :    

Forward Ports 10001 on the Solwise SAR-600EW

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.

Rule Name :    
Protocol :    
Port Start : Port End :
Port Map :    
Solwise SAR-600EW Screenshot 3

Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you are finished, click the Apply button.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Network Thermostat UP32-WIFI on the Solwise SAR-600EW you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Solwise SAR-600EW Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.