Port Forwarding the Solwise SAR130 Router for QSee QSD2216C16-250

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Solwise > SAR130 > QSee QSD2216C16-250

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Solwise SAR130 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.7. <-- Don't Skip This Step!

Login to the Solwise SAR130 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Solwise SAR130 Router IP Address

It's ok if you don't know your Solwise SAR130 router's internal IP address. You can find it by doing one of the following:

Login To The Solwise SAR130 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Solwise SAR130 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Solwise SAR130 router. By default the IP address should be set to

Solwise SAR130 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Solwise SAR130 Router Username is: DSL

The Default Solwise SAR130 Router Password is: DSL

Click the Ok button to log in to your Solwise SAR130 router.

Default Usernames and Passwords for other Solwise Routers

Please visit our Default Solwise Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Solwise SAR130 router username and password, use our How to Reset a Router Password guide to set your Solwise SAR130 router back to its factory settings.

How to Port Forward QSee QSD2216C16-250 on the Solwise SAR130

Having trouble forwarding ports on the Solwise SAR130?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Solwise SAR130 router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR. Use your remote control to enter your DVR's System Setup menu.

Select the Network option from the System Setup menu.

Write down the number that is in the IP ADDR, Gateway, and Sub Net sections. Change the IP Mode to STATIC IP. Do not change the Gateway and Sub Net settings. We are going to create static ip address for your DVR and use it from now on. The IP address in the picture above is The 111 portion of that ip address is called the last octet. Each octet of an ip address ranges from 1 to 254. If you have an ip address where the last octet is closer to 1 than 254, add 50 to the last octet and set the IP ADDR to that. If you have an ip address that is closer to 254 than 1, subtract 50 from that last octet and set the IP ADDR to that. Save the settings and get out of your DVR's setup. In this example the last octet was 111. So the new octet in this example would be 161, and the ip address in this example would be Do not use those values they are just an example.

You will need to restart your DVR before those settings will take effect.

Remember what you set the IP ADDR to. You will need to tell your router what IP Address to forward those ports to. Since you want to forward ports to your DVR you will need your DVR's IP address.

We've already taken care of setting up the static ip address in the guide below so you don't need to worry about that part. Just enter your DVR's static ip address that we just setup in to the box requesting your computer's ip address bellow. You won't really be forwarding ports to your computer, but you will be forwarding them to your DVR. Everything else is the same, just keep in mind that the ports will end up being forwarded to your DVR and not your computer.

Solwise SAR130 Router Port Forwarding Screenshots

Now that you are logged in to your Solwise SAR130 router you should see the following:

Solwise SAR130 Screenshot 2

Click the Services button near the top of the page.

Solwise SAR130 Screenshot 3

Select NAT Rule Entry from the NAT Options drop down box.

Solwise SAR130 Screenshot 4

Click the Add button near the bottom of the page.

Solwise SAR130 Screenshot 6

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD2216C16-250 requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Submit.

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Rule - Add page. Go ahead and enter those settings and then click Submit.

Solwise SAR130 Screenshot 6

Click the Close button near the bottom of the page.

Click the IP Filter link near the top of the page.

Solwise SAR130 Screenshot 7

Select Low from the Security Level drop down box.

Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box.

Click the Submit button near the bottom of the page.

Click the Admin button near the top of the page.

You should now see a new menu. In this new menu, click Commit & Reboot.

Solwise SAR130 Screenshot 8

Click the Commit button near the bottom of the page.

Click the Reboot button near the bottom of the page.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD2216C16-250 on the Solwise SAR130 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Solwise SAR130 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.