To setup port forwarding on the Solwise SAR715 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Solwise SAR715 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Solwise SAR715 router. By default the IP address should be set to 192.168.7.1.
Click the Ok button to log in to your Solwise SAR715 router.
Please visit our Default Solwise Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Solwise SAR715 router username and password, use our How to Reset a Router Password guide to set your Solwise SAR715 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Solwise SAR715 router to save you time and hassle.
Now that you are logged in to your Solwise SAR715 router you should see the following:
Click the Advanced Configuration link near the left of the page.
You should now see a new menu. In this new menu, click Security(Nat,Firewall).
Click the Advanced NAT Configuration link near the center of the page.
Click the Add Reserved Mapping link near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Full Auto requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Add Reserved Mapping menu and then click Add Reserved Mapping.
|Global IP Address||Internal IP|
|(Set to 0.0.0.0 to use the primary IP address of the interface "ppp-0")|
Click the System link near the left of the page.
When you're finished, click Save Config near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Full Auto on the Solwise SAR715 you should test to see if your ports are forwarded correctly.