Port Forwarding the Sonicwall Pro230 Router for Enemy Territory - Quake Wars

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Sonicwall Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Sonicwall > Pro230 > Enemy Territory - Quake Wars

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Sonicwall Pro230 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Sonicwall Pro230 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Sonicwall Pro230 Router IP Address

It's ok if you don't know your Sonicwall Pro230 router's internal IP address. You can find it by doing one of the following:

Login To The Sonicwall Pro230 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Sonicwall Pro230 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sonicwall Pro230 router. By default the IP address should be set to

Sonicwall Pro230 Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward Enemy Territory - Quake Wars on the Sonicwall Pro230

Having trouble forwarding ports on the Sonicwall Pro230?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Sonicwall Pro230 router to save you time and hassle.

Sonicwall Pro230 Router Port Forwarding Screenshots

Now that you are logged in to your Sonicwall Pro230 router you should see the following:

Sonicwall Pro230 Screenshot 2

Click the Access button near the left of the page.

Sonicwall Pro230 Screenshot 3

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Enemy Territory - Quake Wars requires you to forward the following ports: AppFullPortsListTag. Go ahead and enter the settings shown above into the Access menu.

You should see another page of settings that need to be entered into one of the blank lines on your routers Access page. Go ahead and enter those settings now.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Enemy Territory - Quake Wars on the Sonicwall Pro230 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sonicwall Pro230 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Sonicwall Router Screenshots. We have the Internets largest collection of Router Screenshots.