To setup port forwarding on the StarTech BR4100DCv2 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your StarTech BR4100DCv2 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your StarTech BR4100DCv2 router. By default the IP address should be set to 192.168.22.1.
Click the Ok button to log in to your StarTech BR4100DCv2 router.
Please visit our Default StarTech Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your StarTech BR4100DCv2 router username and password, use our How to Reset a Router Password guide to set your StarTech BR4100DCv2 router back to its factory settings.
Now that you are logged in to your StarTech BR4100DCv2 router you should see the following:
Click the General Setup button near the left of the page.
You should now see a new menu. In this new menu, click NAT.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Axis 207MW requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Port Forwarding or Virtual Server menu and then click Add.
|Enable Virtual Server|
|Private IP||Private Port||Type||Public Port||Comment|
And that is it! You are done!
Now that you have forwarded ports for Axis 207MW on the StarTech BR4100DCv2 you should test to see if your ports are forwarded correctly.