Port Forwarding the Starbridge LYNX320 Router for Lorex LH320

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Starbridge > LYNX320 > Lorex LH320

Login to the Starbridge LYNX320 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Starbridge LYNX320 Router IP Address

It's ok if you don't know your Starbridge LYNX320 router's internal IP address. You can find it by doing one of the following:

Login To The Starbridge LYNX320 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Starbridge LYNX320 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Starbridge LYNX320 router. By default the IP address should be set to

Starbridge LYNX320 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Starbridge LYNX320 Router Username is: admin

The Default Starbridge LYNX320 Router Password is: admin

Click the Log In button to log in to your Starbridge LYNX320 router.

Default Usernames and Passwords for other Starbridge Routers

Please visit our Default Starbridge Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Starbridge LYNX320 router username and password, use our How to Reset a Router Password guide to set your Starbridge LYNX320 router back to its factory settings.

How to Port Forward Lorex LH320 on the Starbridge LYNX320

Having trouble forwarding ports on the Starbridge LYNX320?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Starbridge LYNX320 Router Port Forwarding Screenshots

Now that you are logged in to your Starbridge LYNX320 router you should see the following:

Starbridge LYNX320 Screenshot 2

Click the Advanced button near the top of the page.

Starbridge LYNX320 Screenshot 3

Click the Port Forwarding link near the left of the page.

Starbridge LYNX320 Screenshot 4

Put a dot into the User radio button.

Starbridge LYNX320 Screenshot 5

Click the New button near the bottom of the page.

Starbridge LYNX320 Screenshot 6

Forward Ports 80 on the Starbridge LYNX320

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lorex LH320 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name:
Port Start: Port End:
Port Map:
Starbridge LYNX320 Screenshot 5

Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Lorex LH320 on the Starbridge LYNX320 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Starbridge LYNX320 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.