To setup port forwarding on the Steren COM-815 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Steren COM-815 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Steren COM-815 router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Steren COM-815 router.
Please visit our Default Steren Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Steren COM-815 router username and password, use our How to Reset a Router Password guide to set your Steren COM-815 router back to its factory settings.
Now that you are logged in to your Steren COM-815 router you should see the following:
Click the Forwarding link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Servers.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Inventoria Stock Manager requires you to forward the following ports: 97. Go ahead and enter the settings shown above into the Virtual Servers menu.
|ID||Service Port||IP Address||Protocol||Enable|
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Inventoria Stock Manager on the Steren COM-815 you should test to see if your ports are forwarded correctly.