Port Forwarding the SunRocket AC-211-SR Router for QSee QSC26404


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > SunRocket > AC-211-SR > QSee QSC26404

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the SunRocket AC-211-SR router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.251. <-- Don't Skip This Step!

Login to the SunRocket AC-211-SR Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your SunRocket AC-211-SR Router IP Address

It's ok if you don't know your SunRocket AC-211-SR router's internal IP address. You can find it by doing one of the following:

Login To The SunRocket AC-211-SR Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

SunRocket AC-211-SR Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your SunRocket AC-211-SR router. By default the IP address should be set to 192.168.251.1.

SunRocket AC-211-SR Screenshot 1

You should see a box prompting you for your SunRocket AC-211-SR password. Enter the password now.

The Default SunRocket AC-211-SR Router Password is: admin


Click the Authenticate button to log in to your SunRocket AC-211-SR router.


Default Usernames and Passwords for other SunRocket Routers

Please visit our Default SunRocket Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your SunRocket AC-211-SR router password, use our How to Reset a Router Password guide to set your SunRocket AC-211-SR router back to its factory settings.


How to Port Forward QSee QSC26404 on the SunRocket AC-211-SR


Having trouble forwarding ports on the SunRocket AC-211-SR?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your SunRocket AC-211-SR router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR. Press Menu on your remote control to get in to your DVR's main menu.

In main menu, move the Active Frame to the Network icon and press ENTER.

Write down the number that is in the IP, Gateway, and Mask settings. Do not change the Gateway and Mask settings. We are going to create static ip address for your DVR and use it from now on. The IP address in the picture above is 192.0.0.64. The 64 portion of that ip address is called the last octet. Each octet of an ip address ranges from 1 to 254. If you have an ip address where the last octet is closer to 1 than 254, add 50 to the last octet and set the IP ADDR to that. If you have an ip address that is closer to 254 than 1, subtract 50 from that last octet and set the IP ADDR to that. Save the settings and get out of your DVR's setup. In this example the last octet was 64. So the new octet in this example would be 114, and the ip address in this example would be 192.0.0.114. Do not use those values they are just an example.

You will need to restart your DVR before those settings will take effect.

Remember what you set the IP ADDR to. You will need to tell your router what IP Address to forward those ports to. Since you want to forward ports to your DVR you will need your DVR's IP address.

We've already taken care of setting up the static ip address in the guide below so you don't need to worry about that part. Just enter your DVR's static ip address that we just setup in to the box requesting your computer's ip address bellow. You won't really be forwarding ports to your computer, but you will be forwarding them to your DVR. Everything else is the same, just keep in mind that the ports will end up being forwarded to your DVR and not your computer.

SunRocket AC-211-SR Router Port Forwarding Screenshots

Now that you are logged in to your SunRocket AC-211-SR router you should see the following:

SunRocket AC-211-SR Screenshot 2

Click the LAN link near the left of the page.

SunRocket AC-211-SR Screenshot 3

Click the Port Forwarding link near the top of the page.

SunRocket AC-211-SR Screenshot 4

Forward Ports 80 on the SunRocket AC-211-SR

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSC26404 requires you to forward the 80,8000 ports. Go ahead and enter the settings shown above into the Port Forwarding Configuration menu and then click Add.

Port Range Protocol Destination Address
- 192.168.251.


Forward Ports 8000 on the SunRocket AC-211-SR

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding Configuration page. Go ahead and enter those settings and then click Add.

Port Range Protocol Destination Address
- 192.168.251.

When you're finished, click Save NAPT Settings near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSC26404 on the SunRocket AC-211-SR you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

SunRocket AC-211-SR Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.