Login To The Sweex LB000010 Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sweex LB000010 router.
By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your username and password. Enter your username and password now.
The Default Sweex LB000010 Router Username is: admin
The Default Sweex LB000010 Router Password is: 1234
Click the Okd button to log in to your Sweex LB000010 router.
Default Usernames and Passwords for other Sweex Routers
If you can't login to your router because you forgot your Sweex LB000010 router username and password, use our
How to Reset a Router Password guide to set your
Sweex LB000010 router back to its factory settings.
How to Port Forward Qsee QSDR74RTS on the Sweex LB000010
Having trouble forwarding ports on the Sweex LB000010?
If you are having trouble with this guide, then perhaps PFConfig may be your solution.
PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Configuring the DVR to pick up an IP address
Make sure Type is set to DHCP
The DVR will reboot & pick up an ip address from the router.
Identifying the IP address
Write down the ip address, subnet mask & gateway.
Assign a Static IP
Change Type to Static
Input the same ip address, subnet mask & gateway - (you wrote down earlier).
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.
Sweex LB000010 Router Port Forwarding Screenshots
Now that you are logged in to your Sweex LB000010 router you should see the following:
Click the General Setup button near the left of the page.
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server or Port Forwarding.
Forward Ports 80 on the Sweex LB000010
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSDR74RTS requires
you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Virtual Server or Port Forwarding menu and then click Add.
Forward Ports 9000 on the Sweex LB000010
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server or Port Forwarding page.
Go ahead and enter those settings and then click Add.
And that is it! You are done!
Test if Your Ports are Open
Now that you have forwarded ports for Qsee QSDR74RTS on the Sweex LB000010 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool.
Our Open Port Check tool is the only online port checking tool with Guaranteed Results.