To setup port forwarding on the Sweex LB000010 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Sweex LB000010 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sweex LB000010 router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Okd button to log in to your Sweex LB000010 router.
Please visit our Default Sweex Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Sweex LB000010 router username and password, use our How to Reset a Router Password guide to set your Sweex LB000010 router back to its factory settings.
Before we can forward ports for VoipBuster, we need to figure out what ports VoipBuster is using. Here is a brief walkthrough on how to do that. Go ahead and open up VoipBuster.
Click Tools in the menu at the top of your screen. In the list that drops down click Options.
Click Connection on the left hand side of the VoipBuster program. You should now see the menu shown in the screenshot above. Make sure the Use Port box is checked. The number in the box to the right of the Use Port text contains the port you need to forward. You can change the port number, if you want to. Please enter the port you chose into the box below.
Now that you are logged in to your Sweex LB000010 router you should see the following:
Click the General Setup button near the left of the page.
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server or Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. VoipBuster requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server or Port Forwarding menu and then click Add.
|Private IP||Private Port||Type||Public Port||Comment|
And that is it! You are done!
Now that you have forwarded ports for VoipBuster on the Sweex LB000010 you should test to see if your ports are forwarded correctly.