Port Forwarding the Sweex SweexWirelessAnnexB Router for QSee QR DVRs

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Sweex Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Sweex > SweexWirelessAnnexB > QSee QR DVRs

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Sweex SweexWirelessAnnexB router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Sweex SweexWirelessAnnexB Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Sweex SweexWirelessAnnexB Router IP Address

It's ok if you don't know your Sweex SweexWirelessAnnexB router's internal IP address. You can find it by doing one of the following:

Login To The Sweex SweexWirelessAnnexB Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Sweex SweexWirelessAnnexB Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Sweex SweexWirelessAnnexB router. By default the IP address should be set to

Sweex SweexWirelessAnnexB Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Sweex SweexWirelessAnnexB Router Username is: admin

The Default Sweex SweexWirelessAnnexB Router Password is: epicrouter

Click the Ok button to log in to your Sweex SweexWirelessAnnexB router.

Default Usernames and Passwords for other Sweex Routers

Please visit our Default Sweex Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Sweex SweexWirelessAnnexB router username and password, use our How to Reset a Router Password guide to set your Sweex SweexWirelessAnnexB router back to its factory settings.

How to Port Forward QSee QR DVRs on the Sweex SweexWirelessAnnexB

Having trouble forwarding ports on the Sweex SweexWirelessAnnexB?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Sweex SweexWirelessAnnexB Router Port Forwarding Screenshots

Now that you are logged in to your Sweex SweexWirelessAnnexB router you should see the following:

Sweex SweexWirelessAnnexB Screenshot 2

Click the Virtual Server link near the left of the page.

Sweex SweexWirelessAnnexB Screenshot 3

Forward Ports 80 on the Sweex SweexWirelessAnnexB

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR DVRs requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add This Setting.

ID Public Port Private Port Port Type Host IP Address  

Forward Ports 9000 on the Sweex SweexWirelessAnnexB

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Add This Setting.

ID Public Port Private Port Port Type Host IP Address  

When you're finished, click Save Settings near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QR DVRs on the Sweex SweexWirelessAnnexB you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sweex SweexWirelessAnnexB Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Sweex Router Screenshots. We have the Internets largest collection of Router Screenshots.