Port Forwarding the Symantec 200R Router for QSee QT428


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Symantec > 200R > QSee QT428

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Symantec 200R router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Symantec 200R Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Symantec 200R Router IP Address

It's ok if you don't know your Symantec 200R router's internal IP address. You can find it by doing one of the following:

Login To The Symantec 200R Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Symantec 200R Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Symantec 200R router. By default the IP address should be set to 192.168.0.1.

Symantec 200R Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Symantec 200R Router Username is: admin

The Default Symantec 200R Router Password is: password


Click the Ok button to log in to your Symantec 200R router.


Default Usernames and Passwords for other Symantec Routers

Please visit our Default Symantec Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Symantec 200R router username and password, use our How to Reset a Router Password guide to set your Symantec 200R router back to its factory settings.


How to Port Forward QSee QT428 on the Symantec 200R


Having trouble forwarding ports on the Symantec 200R?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Symantec 200R router to save you time and hassle.

  • Go to the Network Menu.
  • Put a check into the Obtain an IP Address Automatically box.
  • Click the Test button.
  • Look near the lower left corner. If it says Ok, then click on Apply, then Exit.


  • Go to Menu - Information and Network
  • Write down the IP Address, Subnet Mask and Gateway.


  • Go back to the Network Menu.
  • Uncheck the Obtain an IP Address Automatically box.
  • Now enter the IP Address, Gateway and Subnet Mask you wrote down earlier.
  • When you're done click Apply, then Exit.

Symantec 200R Router Port Forwarding Screenshots

Now that you are logged in to your Symantec 200R router you should see the following:

Symantec 200R Screenshot 2

Click the Custom Virtual Servers link near the left of the page.

Symantec 200R Screenshot 3

Forward Ports 80 on the Symantec 200R

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QT428 requires you to forward the 80,6036 ports. Go ahead and enter the settings shown above into the Custom Virtual Servers menu and then click Add.

Name
Enable
Server LAN IP
Protocol
Internal Port Range Start Finish
External Port Range Start Finish


Forward Ports 6036 on the Symantec 200R

You should see another page of settings that need to be entered into one of the blank lines on your routers Custom Virtual Servers page. Go ahead and enter those settings and then click Add.

Name
Enable
Server LAN IP
Protocol
Internal Port Range Start Finish
External Port Range Start Finish

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QT428 on the Symantec 200R you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Symantec 200R Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.