To setup port forwarding on the T-Com Speedport-W303V router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your T-Com Speedport-W303V router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your T-Com Speedport-W303V router. By default the IP address should be set to 192.168.2.1.
Click the Konfiguration starten button near the bottom of the page.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your T-Com Speedport-W303V router to save you time and hassle.
Before we can forward ports for eMule, we need to figure out what ports eMule is using. Here is a brief walkthrough on how to do that. Go ahead and open up eMule.
Click the Options button in the menu at the top of your screen.
Click the Connection option on the left hand side of your screen. You should see a TCP box and an UDP box. Enter a random port into each of these boxes. It doesn't matter what ports you choose, but a port numbers between 10000 and 60000 would be a good idea. A higher numbered port is generally the best to use, because most ISP's do not block the higher numbered ports. Please enter the port you chose for the TCP box into the box below.
Please enter the port you chose for the UDP box into the box below.
Now that you are logged in to your T-Com Speedport-W303V router you should see the following:
Click the Netzwerk link near the left of the page.
Click the NAT & Portregeln link near the center of the page.
Click the Port-Weiterleitung link near the top of the page.
Click the Neue Regel definieren link near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. eMule requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Regel Definition menu and then click Speichern.
|Gultig fur Gerat:|
|Weitergeleite Ports - Offentlich & Private Client|
And that is it! You are done!
Now that you have forwarded ports for eMule on the T-Com Speedport-W303V you should test to see if your ports are forwarded correctly.