To setup port forwarding on the T-Com Speedport-W502V router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your T-Com Speedport-W502V router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your T-Com Speedport-W502V router. By default the IP address should be set to 192.168.2.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your T-Com Speedport-W502V router you should see the following:
Click the Netzwerk link near the left of the page.
Click the NAT & Portregeln link near the center of the page.
Click the Port-Weiterleitung link near the center of the page.
Click the Neue Regel definieren link near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lock On Modern Air Combat requires you to forward the 10308 ports. Go ahead and enter the settings shown above into the Regel Definition menu and then click Speichern.
|Gultig fur PC:|
|Weitergeleite Ports - Offentlich & Private Client|
And that is it! You are done!
Now that you have forwarded ports for Lock On Modern Air Combat on the T-Com Speedport-W502V you should test to see if your ports are forwarded correctly.