Port Forwarding the TP-Link TD-W890iG Router for Axis M1031-W

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View TP-Link Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > TP-Link > TD-W890iG > Axis M1031-W

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the TP-Link TD-W890iG router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the TP-Link TD-W890iG Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your TP-Link TD-W890iG Router IP Address

It's ok if you don't know your TP-Link TD-W890iG router's internal IP address. You can find it by doing one of the following:

Login To The TP-Link TD-W890iG Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

TP-Link TD-W890iG Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your TP-Link TD-W890iG router. By default the IP address should be set to

TP-Link TD-W890iG Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default TP-Link TD-W890iG Router Username is: admin

The Default TP-Link TD-W890iG Router Password is: admin

Click the Ok button to log in to your TP-Link TD-W890iG router.

Default Usernames and Passwords for other TP-Link Routers

Please visit our Default TP-Link Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your TP-Link TD-W890iG router username and password, use our How to Reset a Router Password guide to set your TP-Link TD-W890iG router back to its factory settings.

How to Port Forward Axis M1031-W on the TP-Link TD-W890iG

Having trouble forwarding ports on the TP-Link TD-W890iG?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

TP-Link TD-W890iG Router Port Forwarding Screenshots

Now that you are logged in to your TP-Link TD-W890iG router you should see the following:

TP-Link TD-W890iG Screenshot 2

Click the Advanced Setup button near the top of the page.

TP-Link TD-W890iG Screenshot 3

Click the NAT link near the top of the page.

TP-Link TD-W890iG Screenshot 4

Click the Virtual Server link near the bottom of the page.

TP-Link TD-W890iG Screenshot 5

Forward Ports 80 on the TP-Link TD-W890iG

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Axis M1031-W requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

Rule Index :
Application :
Protocol :
Start Port Number :
End Port Number :
Local IP Address :

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Axis M1031-W on the TP-Link TD-W890iG you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

TP-Link TD-W890iG Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our TP-Link Router Screenshots. We have the Internets largest collection of Router Screenshots.