To setup port forwarding on the TP-Link TD-W8920G router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your TP-Link TD-W8920G router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your TP-Link TD-W8920G router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your TP-Link TD-W8920G router.
Please visit our Default TP-Link Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your TP-Link TD-W8920G router username and password, use our How to Reset a Router Password guide to set your TP-Link TD-W8920G router back to its factory settings.
Now that you are logged in to your TP-Link TD-W8920G router you should see the following:
Click the Advanced Setup link near the left of the page.
You should now see a new menu. In this new menu, click NAT.
Click the Add button near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Warhammer 40000 - Space Marine requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virtual Servers menu.
|Select a Service :|
|Custom Server :|
|Server IP Address :|
|External Port Start||External Port End||Protocol||Internal Port Start||Internal Port End|
When you're finished, click Save/Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Warhammer 40000 - Space Marine on the TP-Link TD-W8920G you should test to see if your ports are forwarded correctly.