Port Forwarding the TP-Link TL-WR340GD Router for QSee QSDR74RTC


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View TP-Link TL-WR340GD Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > TP-Link > TL-WR340GD > QSee QSDR74RTC

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the TP-Link TL-WR340GD router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the TP-Link TL-WR340GD Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your TP-Link TL-WR340GD Router IP Address

It's ok if you don't know your TP-Link TL-WR340GD router's internal IP address. You can find it by doing one of the following:

Login To The TP-Link TL-WR340GD Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

TP-Link TL-WR340GD Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your TP-Link TL-WR340GD router. By default the IP address should be set to 192.168.1.1.

TP-Link TL-WR340GD Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default TP-Link TL-WR340GD Router Username is: admin

The Default TP-Link TL-WR340GD Router Password is: admin


Click the Ok button to log in to your TP-Link TL-WR340GD router.


Default Usernames and Passwords for other TP-Link Routers

Please visit our Default TP-Link Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your TP-Link TL-WR340GD router username and password, use our How to Reset a Router Password guide to set your TP-Link TL-WR340GD router back to its factory settings.


How to Port Forward QSee QSDR74RTC on the TP-Link TL-WR340GD


Having trouble forwarding ports on the TP-Link TL-WR340GD?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your TP-Link TL-WR340GD router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

TP-Link TL-WR340GD Router Port Forwarding Screenshots

Now that you are logged in to your TP-Link TL-WR340GD router you should see the following:

TP-Link TL-WR340GD Screenshot 2

Click the Forwarding link near the left side of the page.

You should now see a new menu. In this new menu, click Virtual Servers.

TP-Link TL-WR340GD Screenshot 3

Click the Add New button near the center of the page.

TP-Link TL-WR340GD Screenshot 4

Forward Ports 80 on the TP-Link TL-WR340GD

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR74RTC requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Add or Modify a Virtual Server Entry menu and then click Save.

Service Port:  
IP Address:  
Protocol:  
Status:  


Forward Ports 9000 on the TP-Link TL-WR340GD

You should see another page of settings that need to be entered into one of the blank lines on your routers Add or Modify a Virtual Server Entry page. Go ahead and enter those settings and then click Save.

Service Port:  
IP Address:  
Protocol:  
Status:  

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSDR74RTC on the TP-Link TL-WR340GD you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

TP-Link TL-WR340GD Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our TP-Link TL-WR340GD Router Screenshots. We have the Internets largest collection of Router Screenshots.