Login To The TP-Link TL-WR841N Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your TP-Link TL-WR841N router.
By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
The Default TP-Link TL-WR841N Router Username is: admin
The Default TP-Link TL-WR841N Router Password is: admin
Click the Ok button to log in to your TP-Link TL-WR841N router.
Default Usernames and Passwords for other TP-Link Routers
If you can't login to your router because you forgot your TP-Link TL-WR841N router username and password, use our
How to Reset a Router Password guide to set your
TP-Link TL-WR841N router back to its factory settings.
How to Port Forward QSee QR404-403-3 on the TP-Link TL-WR841N
Having trouble forwarding ports on the TP-Link TL-WR841N?
If you are having trouble with this guide, then perhaps PFConfig may be your solution.
PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Configuring the DVR to pick up an IP address
Make sure Type is set to DHCP
The DVR will reboot & pick up an ip address from the router.
Identifying the IP address
Write down the ip address, subnet mask & gateway.
Assign a Static IP
Change Type to Static
Input the same ip address, subnet mask & gateway - (you wrote down earlier).
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.
TP-Link TL-WR841N Router Port Forwarding Screenshots
Now that you are logged in to your TP-Link TL-WR841N router you should see the following:
Click the Forwarding link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Servers.
Click the Add New button near the center of the page.
Forward Ports 80 on the TP-Link TL-WR841N
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR404-403-3 requires
you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Add or Modify a Virtual Server Entry menu and then click Save.
Forward Ports 9000 on the TP-Link TL-WR841N
You should see another page of settings that need to be entered into one of the blank lines on your routers Add or Modify a Virtual Server Entry page.
Go ahead and enter those settings and then click Save.
And that is it! You are done!
Test if Your Ports are Open
Now that you have forwarded ports for QSee QR404-403-3 on the TP-Link TL-WR841N you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool.
Our Open Port Check tool is the only online port checking tool with Guaranteed Results.