To setup port forwarding on the Technicolor TC7200 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Technicolor TC7200 router. By default the IP address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Login button to log in to your Technicolor TC7200 router.
Please visit our Default Technicolor Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Technicolor TC7200 router username and password, use our How to Reset a Router Password guide to set your Technicolor TC7200 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Before we can forward ports for Utorrent, we need to figure out what ports Utorrent is using. Here is a brief walkthrough on how to do that. Go ahead and open up Utorrent.
Click Options in the menu at the top of your screen. In the list that drops down click Preferences.
Click Connections on the left hand side of the Utorrent program. You should now see the menu shown in the screenshot above. Make sure the Enable UPnP box is unchecked. The number in the Port Used for Incoming Connections box contains the port you need to forward. You can change the port number, if you want to. Please enter the port you chose into the box below.
Now that you are logged in to your Technicolor TC7200 router you should see the following:
Click the Advanced link near the top of the page.
The menu on the left should change. In this new menu, click Forwarding.
Click the Add row button near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Utorrent requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Forwarding menu and then click Add row.
|Public Port Range||Target IP Address||Target Port Range||Protocol||Delete|
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Utorrent on the Technicolor TC7200 you should test to see if your ports are forwarded correctly.