If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.[an error occurred while processing this directive]
To setup port forwarding on the Technicolor TG582n_Technicolor router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Technicolor TG582n_Technicolor router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Technicolor TG582n_Technicolor router. By default the IP address should be set to 192.168.1.254.
Look for your password on the bottom of your router or in the paperwork that came with your router.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Now that you are logged in to your Technicolor TG582n_Technicolor router you should see the following:
Click the Toolbox button near the left of the page.
Click the Game & Application Sharing link near the left of the page.
Click the Create a new game or application link near the bottom of the page.
Enter the name of the program into the Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.
Put a dot into the Manual Entry of Port Maps radio button.
Click the Next button near the bottom of the page.
Use the Protocol drop down box to select the protocol type of the ports you are forwarding.
If you are forwarding a single port, enter that port number into the Translate To, Top Port Range and the Bottom Port Range boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Translate To, Top Port Range box. Then enter the highest number of that range into the Bottom Port Range box.
When you are finished, click the Add button.
Click the Apply button near the top of the page.
Click the Assign a game or application to a local network device link near the bottom of the page.
Use the Device box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.
Select the application you created using the Game or Application drop down box. Then click Add to enable it.
And that is it! You are done!
Now that you have forwarded ports for any port on the Technicolor TG582n_Technicolor you should test to see if your ports are forwarded correctly.