To setup port forwarding on the Tecom AH4222-7CB781 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Tecom AH4222-7CB781 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Tecom AH4222-7CB781 router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Tecom AH4222-7CB781 router to save you time and hassle.
Now that you are logged in to your Tecom AH4222-7CB781 router you should see the following:
Click the Configuration Avancee button near the top of the page.
The menu on the left should change. In this new menu, click NAT.
You should now see a new menu. In this new menu, click Serveurs Virtuels.
Click the Ajouter button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Ecco the Dolphin requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Serveurs Virtuels menu.
|Selectionner un service:|
|Adresse IP du serveur:|
|Port Externe - Debut||Port Externe - Fin||Protocole||Port interne - Debut||Port interne - Fin|
When you're finished, click Sauver / Appliquer near the top of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Ecco the Dolphin on the Tecom AH4222-7CB781 you should test to see if your ports are forwarded correctly.