To setup port forwarding on the Telekom TSinus-130 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Telekom TSinus-130 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Telekom TSinus-130 router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your Telekom TSinus-130 password. Enter the password now.
Click the Login button to log in to your Telekom TSinus-130 router.
Please visit our Default Telekom Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Telekom TSinus-130 router password, use our How to Reset a Router Password guide to set your Telekom TSinus-130 router back to its factory settings.
Now that you are logged in to your Telekom TSinus-130 router you should see the following:
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Virtueller Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Clover CDR0850 requires you to forward the following ports: 5800. Go ahead and enter the settings shown above into the Virtueller Server menu.
|Nr.||Interne IP||Internes Port||Typ||Öffentliches Port|
When you're finished, click Weiter near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Clover CDR0850 on the Telekom TSinus-130 you should test to see if your ports are forwarded correctly.