To setup port forwarding on the Telewell TW-EA511 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Telewell TW-EA511 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Telewell TW-EA511 router. By default the IP address should be set to 192.168.0.254.
Click the Ok button to log in to your Telewell TW-EA511 router.
Please visit our Default Telewell Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Telewell TW-EA511 router username and password, use our How to Reset a Router Password guide to set your Telewell TW-EA511 router back to its factory settings.
Now that you are logged in to your Telewell TW-EA511 router you should see the following:
Click the Advanced link near the left of the page.
Click the Configuration link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
You should now see a new menu. In this new menu, click Port Mapping.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Flatout 2 requires you to forward the 23756 ports. Go ahead and enter the settings shown above into the Port Mapping menu and then click Add.
|Internal IP Address|
|Internal Port||Time Schedule|
When you're finished, click Save Config near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Flatout 2 on the Telewell TW-EA511 you should test to see if your ports are forwarded correctly.