To setup port forwarding on the Telkom Mega-105WR router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Telkom Mega-105WR router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Telkom Mega-105WR router. By default the IP address should be set to 10.0.0.2.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Telkom Mega-105WR router.
Please visit our Default Telkom Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Telkom Mega-105WR router username and password, use our How to Reset a Router Password guide to set your Telkom Mega-105WR router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Before we can forward ports to your DVR, we need to change some settings in your DVR.
Open the SuperDvr program. Click the lock on the right side of the window to log in. By default the username is system and the password is blank. That might mean that you enter nothing for the password, or you might actually have to type blank.
Click the wrench tool on the right hand side of the screen to get in to the configuration menu.
The red box in the screenshot above circles the ports that must be forwarded to your computer's ip address.
Now that you are logged in to your Telkom Mega-105WR router you should see the following:
Click the Advanced button near the top of the page.
The menu on the left should change. In this new menu, click Application.
You should now see a new menu. In this new menu, click Port Forwarding.
Put a dot into the User radio button.
Click the New button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee USB DVR Card requires you to forward the 80,1159-1161 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.
|Port Start:||Port End:|
You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Apply.
|Port Start:||Port End:|
Use the LAN IP box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.
Select the applications you just created in the Available Rules list, then click the Add button to move them to the Applied Rules box.
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for QSee USB DVR Card on the Telkom Mega-105WR you should test to see if your ports are forwarded correctly.