To setup port forwarding on the Telkom Mega-200VWR router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Telkom Mega-200VWR router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Telkom Mega-200VWR router. By default the IP address should be set to 10.0.0.2.
Click the Ok button to log in to your Telkom Mega-200VWR router.
Please visit our Default Telkom Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Telkom Mega-200VWR router username and password, use our How to Reset a Router Password guide to set your Telkom Mega-200VWR router back to its factory settings.
Now that you are logged in to your Telkom Mega-200VWR router you should see the following:
Click the Configuration button near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
Click the Add Virtual Server link near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Hardwood Hearts requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Add Virtual Server menu and then click Apply.
|External Port||from to|
|Redirect Port||from to|
|Internal IP Address|
When you're finished, click Save Config to FLASH near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Hardwood Hearts on the Telkom Mega-200VWR you should test to see if your ports are forwarded correctly.