Port Forwarding the Tenda WBR-T3 Router for Caesar IV

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Tenda WBR-T3 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Tenda > WBR-T3 > Caesar IV

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Tenda WBR-T3 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the Tenda WBR-T3 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Tenda WBR-T3 Router IP Address

It's ok if you don't know your Tenda WBR-T3 router's internal IP address. You can find it by doing one of the following:

Login To The Tenda WBR-T3 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Tenda WBR-T3 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Tenda WBR-T3 router. By default the IP address should be set to

Tenda WBR-T3 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Tenda WBR-T3 Router Username is: admin

The Default Tenda WBR-T3 Router Password is: admin

Click the Ok button to log in to your Tenda WBR-T3 router.

Default Usernames and Passwords for other Tenda Routers

Please visit our Default Tenda Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Tenda WBR-T3 router username and password, use our How to Reset a Router Password guide to set your Tenda WBR-T3 router back to its factory settings.

How to Port Forward Caesar IV on the Tenda WBR-T3

Having trouble forwarding ports on the Tenda WBR-T3?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Tenda WBR-T3 Router Port Forwarding Screenshots

Now that you are logged in to your Tenda WBR-T3 router you should see the following:

Tenda WBR-T3 Screenshot 2

Click the Virtual Server link near the left of the page.

Tenda WBR-T3 Screenshot 3

Forward Ports 3306 on the Tenda WBR-T3

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Caesar IV requires you to forward the following ports: 3306. Go ahead and enter the settings shown above into the Virtual Server menu.

ID Service Port Private IP Enable Del
1. 192.168.0.

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Caesar IV on the Tenda WBR-T3 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Tenda WBR-T3 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Tenda WBR-T3 Router Screenshots. We have the Internets largest collection of Router Screenshots.