To setup port forwarding on the Thomson-Alcatel SpeedTouch570 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Thomson-Alcatel SpeedTouch570 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Thomson-Alcatel SpeedTouch570 router. By default the IP address should be set to 10.0.0.138.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Thomson-Alcatel SpeedTouch570 router to save you time and hassle.
Now that you are logged in to your Thomson-Alcatel SpeedTouch570 router you should see the following:
Click the Ok button to log in to your Thomson-Alcatel SpeedTouch570 router.
Please visit our Default Thomson-Alcatel Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Thomson-Alcatel SpeedTouch570 router username and password, use our How to Reset a Router Password guide to set your Thomson-Alcatel SpeedTouch570 router back to its factory settings.
Click the NAT button near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Wii GoldenEye 007 requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the NAT Settings menu and then click Apply.
|Inside IP:||Inside Port:|
|Outside IP:||Outside Port:|
When you're finished, click Save Settings near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Wii GoldenEye 007 on the Thomson-Alcatel SpeedTouch570 you should test to see if your ports are forwarded correctly.