To setup port forwarding on the Thomson-Alcatel SpeedTouch576 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Thomson-Alcatel SpeedTouch576 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Thomson-Alcatel SpeedTouch576 router. By default the IP address should be set to 192.168.1.254.
Click the Ok button to log in to your Thomson-Alcatel SpeedTouch576 router.
Please visit our Default Thomson-Alcatel Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Thomson-Alcatel SpeedTouch576 router username and password, use our How to Reset a Router Password guide to set your Thomson-Alcatel SpeedTouch576 router back to its factory settings.
Now that you are logged in to your Thomson-Alcatel SpeedTouch576 router you should see the following:
Click the Toolbox button near the left of the page.
Click the Game & Application Sharing link near the left of the page.
Click the Create a new game or application link near the bottom of the page.
Enter the name of the program into the Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.
Put a dot into the Manual Entry of Port Maps radio button.
Click the Next button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Painkiller requires you to forward the 3455 ports. Go ahead and enter the settings shown above into the Application menu and then click Add.
|Protocol||Port Range||Translate To ...||Trigger Protocol||Trigger Port|
Click the Apply button near the top of the page.
Click the Assign a game or application to a local network device link near the bottom of the page.
Use the Device box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.
Select the application you created using the Game or Application drop down box. Then click Add to enable it.
And that is it! You are done!
Now that you have forwarded ports for Painkiller on the Thomson-Alcatel SpeedTouch576 you should test to see if your ports are forwarded correctly.